What BBQ Smoke Exposure Tells You About Occupational Chemical Exposures

With summer coming, it’s only a matter of time before the smells and tastes of barbecued foods dominate the neighborhood. But there’s a downside to grilling that can literally get under your skin. In a study appearing in Environmental Science & Technology, scientists report that skin is a more important pathway for uptake of cancer-causing compounds produced during barbecuing than inhalation. They also found that clothing cannot fully protect individuals from this exposure.

In the U.S., 70% of adults own a grill or a smoker, and more than half of them grill at least four times a month, according to the Barbecue Industry Association. But barbecuing produces large amounts of polycyclic aromatic hydrocarbons, or PAHs. These carcinogenic compounds can cause respiratory diseases and DNA mutations. Eating grilled foods is the most common source of PAHs arising from barbecuing. However, according to a previous study by Eddy Y. Zeng and colleagues, bystanders near barbecues were likely exposed to considerable amount of PAHs through skin exposure and inhalation, even if they didn’t eat the grilled foods. Building on that study, the team sought to more precisely quantify skin uptake of PAHs from barbecue fumes and particles.

The researchers divided volunteers into groups at an outdoor barbecue to provide them with varying degrees of exposure to the food and the smoke. After analyzing urine samples from the volunteers, the researchers concluded that, as expected, diet accounted for the largest amount of PAH exposure. However, the skin was the second-highest exposure route, followed by inhalation. They say oils in barbecue fumes likely enhance skin uptake of PAHs. The team also found that while clothes may reduce skin exposure to PAHs over the short term, once clothing is saturated with barbecue smoke, the skin can take in considerable amounts of PAHs from them. They suggest washing clothes soon after leaving a grilling area to reduce exposure.

So, what can we learn from BBQ smoke about occupational chemical exposures? It's that workplace exposures might be complex. We might protect workers with respirators, but what about skin exposure? Even if workers wear impervious gloves, fumes and vapors in the air can lead to skin exposures that may have been overlooked. Worker clothing might not be protective and could even exacerbate chemical exposures. Therefore, more research is needed to evaluate chemicals in the workplace to determine if any exposures have been overlooked, and if so, new protections may be needed.

Hazardous Waste Training

Annual hazardous waste training is required for anyone who generates, accumulates, stores, transports, or treats hazardous waste. Learn how to manage your hazardous waste in accordance with the latest state and federal regulations. Learn how to complete EPA’s new electronic hazardous waste manifest, and the more than 60 changes in EPA’s new Hazardous Waste Generator Improvements Rule. Environmental Resource Center’s Hazardous Waste Training is available at nationwide locations, and via live webcasts. If you plan to also attend DOT hazardous materials training, call 800-537-2372 to find out how can get your course materials on a new Amazon Fire HD10 tablet.

What’s on OSHA’s Agenda

All federal agencies that publish regulations are required to publish a semiannual regulatory agenda in order to inform the regulated community of pending, as well as recently completed regulatory actions. In the past, OSHA published regulatory agendas spanning dozens of proposed rules. The Agency’s current agenda is much more limited, it includes:

Communication Tower Safety

While the number of employees engaged in the communication tower industry remains small, the fatality rate is very high. Over the past 20 years, this industry has experienced an average fatality rate that greatly exceeds that of the construction industry, for example. Falls are the leading cause of death in tower work and OSHA has evidence that fall protection is used either improperly or inconsistently.

Employees are often hoisted to working levels on small base-mounted drum hoists that have been mounted to a truck chassis, and these may not be rated to hoist personnel. According to OSHA, communication tower construction and maintenance activities are not adequately covered by current OSHA fall protection and personnel hoisting standards, and OSHA plans to use information it will collect from a Small Business Regulatory Enforcement Fairness Act (SBREFA) panel to identify effective work practices and advances in engineering technology that would best address industry safety and health concerns. While this panel will be focused on communication towers, OSHA plans to consider inclusion of structures that have telecommunications equipment on or attached to them (e.g., buildings, rooftops, water towers, billboards, etc.). An estimated date for a proposed rule has not been identified.

Tree Care Standard

Because there is no OSHA standard for tree care operations; the agency currently applies a patchwork of standards to address the serious hazards in this industry. The tree care industry previously petitioned the agency for rulemaking and OSHA issued an ANPRM (September 2008). Tree care continues to be a high-hazard industry and OSHA intends to initiate a Small Business Regulatory Enforcement Fairness Act (SBREFA) panel in April, 2019.

Infectious Diseases

Employees in health care and other high-risk environments face long-standing infectious disease hazards such as tuberculosis, varicella disease (chickenpox, shingles), and measles (rubeola), as well as new and emerging infectious disease threats, such as Severe Acute Respiratory Syndrome (SARS) and pandemic influenza.

Health care workers and workers in related occupations, or who are exposed in other high-risk environments, are at increased risk of contracting tuberculosis, SARS, Methicillin-Resistant Staphylococcus Aureus (MRSA), and other infectious diseases that can be transmitted through a variety of exposure routes. OSHA is examining regulatory alternatives for control measures to protect employees from infectious disease exposures to pathogens that can cause significant disease. Workplaces where such control measures might be necessary include: Health care, emergency response, correctional facilities, homeless shelters, drug treatment programs, and other occupational settings where employees can be at increased risk of exposure to potentially infectious people. A standard could also apply to laboratories, which handle materials that may be a source of pathogens, and to pathologists, coroners' offices, medical examiners, and mortuaries. An estimated date for a proposed rule has not been identified.

Process Safety Management (PSM) and Prevention

In accordance with the Executive Order 13650, Improving Chemical Facility Safety and Security, OSHA issued a Request for Information (RFI) on December 9, 2013 (78 FR 73756). The RFI identified issues related to modernization of the Process Safety Management standard and related standards necessary to meet the goal of preventing major chemical accidents. Although potential changes in the PSM standard has been on OSHA’s agenda for several years, significant movement on any changes has not occurred and an estimated date for a proposed rule has not been identified.

Contractor Cited for Fall and Other Safety Hazards

OSHA has cited Appleton, WI roofing contractor Hector Hernandez again after OSHA inspectors observed employees exposed to falls and other safety hazards at two Wisconsin job sites. OSHA proposed penalties of $120,320.

Hernandez, who operates Town City Construction, was cited for one repeated and two willful violations for failing to provide fall protection, train workers on fall hazards, properly install an extension ladder for safe egress, and provide required ladder jack scaffold components.

Hernandez has 15 business days from receipt of the citations and penalties to comply, request an informal conference with OSHA's area director, or contest the findings before the independent Occupational Safety and Health Review Commission.

Healthcare Challenges After Radiological Incidents

Many resources are available for healthcare, public health, and emergency management professionals planning for a potential large-scale radiological release or nuclear detonation incident, but planning is difficult, and few jurisdictions have detailed plans. The Office of the Assistant Secretary for Preparedness and Response (ASPR) Technical Resources, Assistance Center, and Information Exchange (TRACIE) will host a webinar with panelists to discuss the impact and potential solutions of different event types and provide guidance and lessons learned related to casualties of radiological and nuclear emergencies. The webinar will take place July 11, 2018 from 2:00-3:15 p.m. ET.

Safety News Links

Catchy Quotes from Court of Appeals Argument on OSHA’s Silica Standard

Inadequate Mechanical Integrity & Preventive Maintenance Lead to Chemical Accidents

Design, Testing, and Modeling of Environmental Enclosures for Controlling Worker Exposure to Airborne Contaminants

Exposure to Metals at an Electronics Recycling Facility

DOE Faults NNSA Field Office for Lab’s Safety Issues

Please Rate Us

If you enjoy reading the Safety Tip of the Week, or if you have taken advantage of Environmental Resource Center’s consulting or training services, we’d appreciate your review on Google at this link: https://goo.gl/uZXmlL

The post What BBQ Smoke Exposure Tells You About Occupational Chemical Exposures appeared first on Environmental Resource Center.

Certain Provisions of the Beryllium Standard in Effect

OSHA confirmed in a memorandum that certain requirements of the final rule on occupational exposure to beryllium in general industry, construction, and shipyards went into effect on May 11, 2018. Those requirements included the permissible exposure limits in the general industry, construction, and shipyard standards; and the exposure assessment, respiratory protection, medical surveillance, and medical removal provisions in the general industry standard.

Aside from these requirements, other ancillary provisions included in the beryllium standard for general industry will not be enforced until June 25, 2018. However, under the terms of settlement agreements with petitioners who challenged the rule, the Agency plans to issue a proposal to further extend this compliance date for the ancillary provisions to December 12, 2018.

OSHA previously proposed to remove the ancillary requirements from the beryllium standards for the construction and maritime industries. In accordance with that proposal, OSHA will enforce the permissible exposure limits, but will not enforce any other provisions for beryllium exposure in those standards unless it provides notice.

Certain compliance dates outlined in the rule remain unchanged. Enforcement of the general industry requirements for change rooms and showers will begin March 11, 2019; and requirements for engineering controls will begin March 10, 2020.

Hilton Head Hazardous Waste and DOT Hazardous Materials Training

Register for Hazardous Waste Management: The Complete Course and DOT Hazardous Materials Training: The Complete Course in Hilton Head, SC on May 22-24 and save $100 or receive an Amazon Fire HD 10 tablet with electronic versions of both handbooks. To take advantage of this offer, click here or call 800-537-2372.

Baton Rouge Hazardous Waste and DOT Hazardous Materials Training

Register for Hazardous Waste Management: The Complete Course and DOT Hazardous Materials Training: The Complete Course in Baton Rouge, LA on June 5-7 and save $100 or receive an Amazon Fire HD 10 tablet with electronic versions of both handbooks. To take advantage of this offer, click here or call 800-537-2372.

Chattanooga Hazardous Waste and DOT Hazardous Materials Training

Register for Hazardous Waste Management: The Complete Course and DOT Hazardous Materials Training: The Complete Course in Chattanooga, TN on June 12-14 and save $100 or receive an Amazon Fire HD 10 tablet with electronic versions of both handbooks. To take advantage of this offer, click here or call 800-537-2372.

$222,152 in Penalties Proposed for Repeat Offender

OSHA has again cited Hua Da Construction in Philadelphia for exposing employees to dangerous workplace safety hazards. OSHA proposed penalties of $222,152.

In October 2017, OSHA responded to a complaint of imminent danger at a company work site. OSHA cited the employer for exposing workers to electrical shock, trip, fall, struck-by, and impalement hazards; obstructed egress routes; unsafe use of ladders and compressed gas cylinders; and lack of fall protection. The Agency cited the company for similar violations in 2016.

“Employers have a legal responsibility to provide a safe and healthful workplace,” said Theresa Downs, OSHA Philadelphia Area Office Director. “This employer continued to disregard OSHA standards, and put workers at risk for injury from multiple safety hazards.”

Two Colorado Companies Cited for Workplace Safety Failures After Fatal Fire

DCP Midstream LP and Complete Energy Services, Inc. were cited by OSHA after two employees suffered fatal burns from a fire at a gas pipeline in Weld County.

Two employees of Complete Energy and one employee of DCP Midstream were clearing a blockage in a gas pipeline operated by DCP Midstream when the fire occurred. OSHA investigators determined that flammable vapors or gases from a vacuum truck leaked, igniting the pipeline. OSHA cited both companies for failing to control potential ignition sources in a work area; isolate hazardous energy sources using lockout procedures; and train employees on detecting flammable hydrocarbons in the workplace. The two companies face $79,004 in proposed penalties.

“The employer could have prevented this tragedy by taking appropriate precautions to prevent contact between flammable materials and potential ignition sources,” said OSHA Denver Area Office Director Herb Gibson.

36 Safety and Health Violations Discovered at Oldcastle Lawn and Garden Inc. 

OSHA cited Oldcastle Lawn & Garden, Inc., after a workplace safety inspection found 36 violations that put employees at risk. The Shady Dale, Georgia, manufacturer of mulch and other products faces proposed penalties of $251,108.

Inspectors cited the company for safety and health violations, including amputation, struck-by, caught-in, electrical, and fall hazards; fire hazards from accumulated combustible dust; and exposure to excessive noise levels, and hazardous energy during machine servicing and maintenance. The inspection was part of OSHA's National Emphasis Program on Amputations.

"Employers are required to assess their workplace for potential hazards," said William Fulcher, OSHA Atlanta-East Area Office Director. "Unfortunately, this employer failed to correct a wide-range of safety deficiencies and needlessly put their employees at risk of serious injury."

Safer Electronic Cigarettes

UL, a leading global safety science organization, recently announced the publication of the ANSI/CAN/UL 8139, Standard for Electrical Systems of Electronic Cigarettes, which is recognized by the American National Standards Institute (ANSI) and the Standards Council of Canada (SCC). UL aims to help manufacturers address lithium battery hazards for electronic cigarettes and vaping devices, also known as ENDS (electronic nicotine delivery systems) through evaluation, testing, and certification.

According to the Electronic Cigarette Fires and Explosions in the United States (2009-2016) report by the U.S. Fire Administration, there has been an increase in e-cigarette fires and explosions resulting in personal injury and/or property damage. Poor quality and misused lithium batteries are the primary causes of e-cigarette fires and explosions.

“UL strives to help manufacturers develop and bring safer products to market and empowering consumer trust,” said Ghislain Devouge, vice president and general manager for UL’s Consumer Technology division, “UL 8139 is a collaborative effort with government agencies and standards bodies to further enhance consumer safety.”

UL 8139 covers the electrical system including batteries, chargers, as well as protection circuits and controls for battery safety, electric shock and fire hazards.

UL 8139 does not apply to the e-cigarette consumables, such as e-liquids, other aerosol substances, wicks, and other particulate matter, and also does not consider the physiological and psychological effects of any consumables used as part of the product. UL does not test e-cigarettes with removable batteries.

Tips to Prevent Tick- And Mosquito-Borne Illnesses 

As the weather warms up, ticks and mosquitoes are back. The Illinois Department of Public Health (IDPH) is reminding people about simple precautions they can take to avoid bites.

"Ticks can carry diseases like Lyme disease, spotted fever, and ehrlichiosis, while mosquitoes can carry West Nile virus," said Illinois Department of Public Health (IDPH) Director Nirav D. Shah, M.D., J.D.  "These diseases can cause anywhere from mild to severe illness, and even death in some cases.  To protect yourself from both, use insect repellent that contains DEET and follow some simple precautions."

According to the Center for Disease Control and Prevention, disease cases from mosquito, tick, and flea bites have tripled in the U.S. during the 13 years from 2004 through 2016.  Reported cases from mosquito and tick bites in Illinois have increased by more than half (58%) from 2005 to 2016.

Many tick-borne diseases have similar symptoms.  The most common symptoms can include fever, chills, aches and pains, and rash.  Within two weeks following a tick bite, if you experience a rash that looks like a bull's-eye or a rash anywhere on your body, or an unexplained illness accompanied by fever, contact your doctor. Early recognition and treatment of the infection decreases the risk of serious complications.  Tell your health care provider the geographic area in which you were bitten or traveled to help identify the disease based on ticks in that region.

A fairly new virus called Bourbon virus has been associated with tick bites and has been found in a limited number of cases in the Midwest and southern U.S. People diagnosed with Bourbon virus disease have symptoms including fever, fatigue, rash, headache, other body aches, nausea, and vomiting. They also had low blood counts for cells that fight infection and help prevent bleeding. Some people who were infected later died.

Ticks are commonly found on the tips of grasses and shrubs. Ticks crawl―they cannot fly or jump. The tick will wait in the grass or shrub for a person or animal to walk by and then quickly climb aboard.  Some ticks will attach quickly and others will wander, looking for places like the ear, or other areas where the skin is thinner.

Read more on Certain Provisions of the Beryllium Standard in Effect.

Construction Caught-in Accidents Increase

Caught-in or caught-between incidents resulted in 275 construction worker deaths from 2011 to 2015 — the most of any major industry — according to a recent report from the Center for Construction Research and Training (also known as CPWR).

About 69% of the deaths were attributed to “being caught or crushed in collapsing materials,” a 50% increase over the five-year period, the report states.

Other findings:

• In 2015, 68 construction workers died from a caught-in or between incidents. That is a 33% increase from 2011, when 51 workers were killed.
• Ironworkers experienced the highest rate of caught-in or between fatalities.
• Older construction workers experienced an elevated fatality risk.
• Among other major industries, manufacturing (244 deaths) and agriculture (197) experienced the next highest totals of caught-in or between fatalities from 2011 to 2015.

“Caught-in or between injuries and deaths are preventable,” the report states, pointing to training, engineering controls, safety protocols, and personal protective equipment as possible solutions.

Caught-in or between incidents are among OSHA’s “Construction Focus Four” hazards, which also include electrocution, falls and struck-by incidents.

Charleston Hazardous Waste and DOT Hazardous Materials Training

Register for Hazardous Waste Management and DOT Hazardous Materials Training: The Complete Course in Charleston, SC, on March 19–21 and save $100 or receive an Amazon Fire HD 10 tablet with electronic versions of both handbooks. To take advantage of this offer, click here or call 800–537–2372.

Jacksonville Hazardous Waste and DOT Hazardous Materials Training

Register for Hazardous Waste Management and DOT Hazardous Materials Training: The Complete Course in Jacksonville, FL, on March 27–29 and save $100 or receive an Amazon Fire HD 10 tablet with electronic versions of both handbooks. To take advantage of this offer, click here or call 800–537–2372.

New Orleans Hazardous Waste and DOT Hazardous Materials Training

Register for Hazardous Waste Management and DOT Hazardous Materials Training: The Complete Course in New Orleans, LA, on April 3–5 and save $100 or receive an Amazon Fire HD 10 tablet with electronic versions of both handbooks. To take advantage of this offer, click here or call 800–537–2372.

$40,096 OSHA Fine for Employee Death

OSHA has cited L.I. Aluminum Design Inc., a Naples-based patio and pool enclosure manufacturer and installer, for failing to protect employees from fall hazards. Proposed penalties total $40,096.

OSHA investigated the company after an employee installing patio screen enclosures suffered a fatal fall. L.I. Aluminum was issued four serious citationsfor failing to provide fall protection to employees working at heights of 10 feet or more; exposing employees to falls; and failing to train employees on fall hazards and the proper use of ladders.

“This tragedy could have been avoided if the employer had ensured that workers were adequately trained and wearing appropriate fall safety equipment,” said Condell Eastmond, OSHA Office Director for the Fort Lauderdale Area. “Falls are preventable if required safety measures are implemented.”

Free, Confidential Black Lung Screenings to Coal Miners

Beginning in March 2018, the National Institute for Occupational Safety and Health (NIOSH) will offer a series of free, confidential health screenings to coal miners as part of the Coal Workers’ Health Surveillance Program (CWHSP). The screenings are intended to provide early detection of coal workers’ pneumoconiosis (CWP), also known as black lung, a serious but preventable occupational lung disease in coal miners caused by breathing respirable coal mine dust.

The health screenings are provided through the state-of-the-art NIOSH mobile testing units at convenient community and mine locations. This year’s first week of surveys will begin March 19 — March 23 in coal mining regions throughout Western Kentucky. The following week, March 26–30, screenings are offered throughout Mingo, Logan, and Wayne Counties in West Virginia. Additional survey locations include coal mining regions throughout the rest of West Virginia, Pennsylvania, Ohio, and Maryland. Twelve weeks of surveys are planned this year.

“If black lung is caught early, steps can be taken to help prevent it from progressing to the most serious forms of the disease,” said NIOSH Director John Howard, M.D. “The NIOSH surveillance program provides both underground and surface miners with confidential screenings that can enable and motivate action towards reducing their exposure to coal dust.”

Screenings provided by NIOSH will include a work history questionnaire, a chest radiograph, a respiratory assessment questionnaire, spirometry testing, and blood pressure screening. The screenings typically take about 30 minutes and each individual miner is provided with their results. By law, each person’s results are confidential. No individual information is publicly disclosed.

Participation in this program gives the coal miner:

• An easy way of checking on their health;
• A confidential report regarding whether or not they have radiographic evidence of CWP;
• A confidential report about their lung function.

Miners can look for survey announcements on the program’s website, Facebook and @NIOSHBreathe twitter. Local and individual outreach will be done in all specific locations. All coal miners — current, former, underground, surface, and those under contract — are welcome to participate.

NIOSH encourages miners and their families to go to the CWHSP website to get additional information about the program. People may also call toll free 888–480–4042 with questions.

Read more on Environmental Resource Center .